|
|
|
|
VIDEO
MOTION DETECTOR
|
 |
|
|
S
P E C I F I C A T I O N S
|
|
VIDEO MOTION DETECTOR
|
MODEL
NO.:TT-9-25
INPUT VOLTAGE: 117 / 220 VAC, 50 / 60 HZ
VIDEO INPUT: 1.0 Vp-p / 75 OHM, 1 INPUT
VIDEO OUTPUT: 1.0 Vp-p / 75 OHM, 2 OUTPUTS (WITH DETECTION WINDOW
SIGNALS FOR INDICATING THE MOTION DETECTING AREAS)
WINDOW POSITION: FOUR WINDOWS
MOTION DETECTING WINDOW: INDIVIDUALLY ADJUSTABLE
HORIZONTAL POSITION: WITHIN 80% OF HORIZONTAL
PICTURE SIZE
VERTICAL POSITION: WITHIN 80% OF VERTICAL PICTURE
SIZE
SENSITIVITY: ADJUSTABLE
WINDOW DISPLAY: SELECTABLE (ON or MARK)
ALARM INDICATION: ALARM INDICATOR LED, BUZZER ALARM
ALARM OUTPUT: RELAY CONTACT (NO/NC), SCREW TERMINAL-DETACHABLE
CONTACT CAPACITY: DC12V, 1A, AT RESISTANCE LOAD
ALARM OUT 1 - 4, ALARM (ON), NORMAL (OFF)
RESET: AUTOMATIC MANUAL OR REMOTE RESET
AUTOMATIC RESET TIME: AUTOMATIC RESET TIME CAN BE
ADJUSTED IN 1977 A RANGE OF BETWEEN 1 - 75 SECONDS
MANUAL RESET: PUSH RESET BUTTOM
REMOTE RESET: BY EXTERNAL REMOTE CONTROL
DIMENSIONS : 270 (W) x 220 (D) x 53 (H) M
NET WEIGHT: 1.0 KG (2.21 LBS)
|
|
|
|
|
|
SCANNER CONTROL
|
 |
|
|
S
P E C I F I C A T I O N S
|
|
SCANNER CONTROL
|
MODEL
NO.:TT-1-14
CONTROL OPTIONS: 1. AUTOMATIC L / R ALTERNATION
CONTROL: SET SWITCH TO “AUTO”
POSITION THE ALTERNATED BASE STOP RUNNING RIGHTWARD WHEN
REACH THE RIGHT END MARGIN, AND THEN START LEFTWARD AND
STOP
AGAIN THE UNTIL REACH LEFT END MARGIN. AGAIN, THE BASE
GO
RIGHTWARD AND REPEATED. (NOTE: THE ANGLE RANGE OF
ALTERNATION IS DECIDED BY END MARGIN SETTING)
2. MANUAL L/R ALTERNATION CONTROL:
SET SWITCH TO MANUAL POSITION:
PRESS LEFT OR RIGHT BUTTON, THE ALTERNATING BASE WILL
MOVE
LEFT OF RIGHT. RELEASE THE BUTTON TO STOP.
CONNECTION: 1. AC POWER CABLE
2. COMMON GROUND
3. LEFT
4. RIGHT
INPUT VOLTAGE: 110VAC / 220VAC
OUTPUT VOLTAGE: 24V/110V/220VAC
CONTROL FUNCTION: AUTO / MANUAL L / R
DIMENTIONS: 150 mm (W) x 200 mm (D) x 40 (H) mm
|
|
|
|
|
|
VCR
CONTROL
|
|
|
|
|
S
P E C I F I C A T I O N S
|
|
VCR CONTROL
|
MODEL
NO.:TT-5-14
THE VIDEO RECORDER CONTROLLER IS
TO START THE VIDEO RECORDING FUNCTION WHEN THE
ALARM IS STARTED. THE FUNCTIONS ARE AS BELOW:
FRONT DISPLAY BOARD
BUZZER - SWITCH FOR CONTROLLING INTERIOR OR EXTERIOR
ALARM SPEAKERS.
REC - VIDEO RECORDING INDICATION LAMP-RECORDING.
STOP - VIDEO RECORDING INDICATION LAMP-STOP.
DELAY - VIDEO RECORDING TIME CONTROL.
POWER - POWER ON / OFF SWITCH.
REAR CONNECTION BOARD
STOP - VIDEO RECORDER “STOP” SWITCH CONNECTION
SOCKET.
RECORD - VIDEO RECORDER “ON” SWITCH CONNECTION
SOCKET.
ALARM - ALARM DETECTOR CONNECTION SOCKET.
DC 12V - 12 DC POWER OUTPUT CONNECTION SOCKET.
BZ - EXTERIOR SPEAKER CONNCTION SOCKET.
|
|
|
|
|
|
VIDEO
AMPLIFIER
|
 |
|
|
S
P E C I F I C A T I O N S
|
|
VIDEO AMPLIFIER
|
MODEL
NO.:TT-7-14
INPUT VOLTAGE: 117 / 220 VAC,
50 / 60 HZ
VIDEO INPUT: 1.0 VP-P / 75 OHM, 1 INPUT
VIDEO OUTPUT: 0.4 VP-P to 2.0 VP-P / 75 OHM,
1 OUTPUT
GAIN/HIGH FRENQUENCY: 10 MHZ to 4.5 MHZ (+-0.3
dB)
FRENQUENCY BRANDWIDTH: 4.5 MHZ
MAX. VIDEO GAIN: 13 dB
MAX. HIGH FREQUENCY: 18 dB
POWER CONSUMPTION : 1.82 WATTS
VIDEO CONNECTORS: BNC CONNECTOR OR F. CONNECTOR
OPERATING TEMPERATURE : -5? to + 60?
DIMENSIONS : 15 mm (W) x 44mm (H) x 212mm
(D)
NET WEIGHT: 1.0 KG (2.21 LBS) |
|
|
|
|
|
|
|
VIDEO
DISTRIBUTOR
|
 |
|
|
S
P E C I F I C A T I O N S
|
|
VIDEO DISTRIBUTOR
|
MODEL
NO.:TT-6-14
MODEL NO. : TT-6-14
INPUT VOLTAGE: 117 / 220 VAC, 50 / 60
HZ
VIDEO INPUT: 1.0 VP-P to 2.0 Vp-p /
75 OHM, 1 INPUT
VIDEO OUTPUT: 1.0 VP-P to 2.0 Vp-p /
75 OHM, 6 OUTPUTS
VIDEO GAIN: 1 dB
POWER CONSUMPTION : 4.0 WATTS
VIDEO CONNECTORS: BNC CONNECTOR
OPERATING TEMPERATURE : -10? to + 55?
DIMENSIONS : 152mm (W) x 45mm (H) x
205mm (D)
NET WEIGHT: 1.0 KG (2.21 LBS) |
|
|
|
|
|
VIDEO
TIMER
|
 |
|
|
S
P E C I F I C A T I O N S
|
|
VIDEO TIMER
|
MODEL
NO.:TT-8-14
THIS TIMER DEVICE
HAS THREE PUSH BUTTONS (UPPER,
LOWER AND RIGHT SIDE BUTTON).
WHEN MAKING AN AMENDMENT OR ATTEMP
TO DISPLAY THE TIME, PUSH THE
RIGHT BUTTON, EVERY ONE PUSH ON
THE RIGHT BUTTON WILL DISPLAY
A DIFFERENT INFORMATION TO BE
AMENDED ALTERMATELY. SUCH AS:
YEAR, MONTH, DATE, HOUR, MINUTE,
SECOND, UP-DOWN
POSITION, LEFT-RIGHT POSITION,
AND THE ENGLISH / NUMBER INFORMATIONS
ON THE UPPER
POSITION OF THE TIMER. ALL ABOVE
INFORMATIONS WILL BE DISPLAYED
ALTERNATELY BY
PUSHING THE RIGHT BUTTON, THE
SELECTED INFORMATION WILL APPEAR
BLINKING FOR
AMENDMENT. USE THE UPPER AND LOWER
PUSH BUTTONS MAKE AMENDMENTS OR
CHANGES.
EXAMPLE: MAKING
A “YEAR” AMENDMENT
SWITCH ON THE
POWER, THE NUMBERS WILL BE DISPLAYED
ON SCREEN AFTER 4 SECONDS.
PUSH THE RIGHT BUTTON UNTIL
THE “YEAR” BLINKS.
USE THE UPPER OR LOWER BUTTON
TO INCREASE OR DECREASE THE
“YEAR NUMBER”.
WHEN AMENDMENT IS MADE, LEAVE
THE CORRECTED YEAR NUMBER BLINKING
WITHOUT
TOUCHING ANY ANTHER BUTTONS,
THE YEAR INFORMATION WILL BE
AUTOMATICALLY SET AFTER BLINKING
30 SECONDS.
REMARKS: THE
ENGLISH / NUMBER INFORMATION
ON THE UPPER POSITION OF THE
TIMER ARE
SET BLANK AT THE PRODUCTION
LINE. USERS COULD SET THE INFORMATION
AS
ABOVE MENTIONED PROCEDURES.
WHEN PUSHING THE UPPER BUTTON,
THE
ENGLISH WILL BE SET AS A “N”,
WHILE AS A “ “ IS SET WHEN PUSH
THE LOWER
BUTTON. DETAILS ARE TO BE REFERED
AS FOLLOWS FOR YOUR FURTHER
INFORMATION.
|
|
|
|
|
|
|
|
|
|
|
|